Filter
Top Products
- 28 -
Enable: Click to enable or disable HTTP access for remote management.
Remote IP Range: Type the range of IP addresses that can be used for remote access.
Allows to Ping WAN Port: This function allows remote users to ping WRT-410 WAN port IP address.
Enable: Click to enable or disable WAN port pinged function.
Remote IP Range: Type the range of IP addresses that can ping from remote locations.
UPNP Enable: Click to enable or disable UPNP.
Gaming mode: Click to enable or disable Game mode.
PPTP: Click to enable or disable PPTP passthrough.
IPSec: Click to enable or disable IPSec passthrough.
3.7 Tools
3.7.1 Restart
Click Restart to restart the system in the event the system is not performing correctly.
3.7.2 Settings
This screen allows you to save settings as a profile and load profiles for different circumstances. You can
also load the factory default settings, and run a setup wizard to configure the WRT-410 and WRT-410
interface.