Filter
Top Products
2
Hardware Installation
15
Jumper JP2s settings are shown below.
2.5 Jumper Settings for Clearing CMOS Data
Jumper JP3
Clear CMOS Data
If, for some reason, the CMOS data
becomes corrupted or you forgot
the supervisor/user/keyboard
password, the system can be
reconfigured with the default values
stored in the ROM BIOS. To load
the default values, power off your
system and unplug the power cord.
Set JP3 pins 2 and 3 to On. Wait
for a few seconds and set JP3 back
to its default setting, pins 1 and 2
On. You may now plug the power
cord and power-on your system.
2-3 On:
Clear CMOS Data
1-2 On: Normal
(default)
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
2-3 On: 66MHz
1-2 On: Auto
(default)
1-2-3 Off: 100MHz