Filter
Top Products
2
20
Hardware Installation
2.7.7 IrDA Connector
The system board is equipped with an IrDA connector for wireless
connectivity between your computer and peripheral devices. The
IRDA (Infrared Data Association) specification supports data
transfers of 115K baud at a distance of 1 meter.
Connect your IrDA cable to connector J12 on the system board. Set
UART2 Mode Select in the Integrated Peripherals setup of the
Award BIOS to the type of IrDA standard supported by your
device. You must have the proper drivers installed in your operating
system to use this connector. Refer to your operating systems
manual or documentation.
2.7.6 USB Ports
You must have the proper drivers
installed in your operating system to use
these ports. Refer to your operating
systems manual or documentation.
Pin
1
2
3
4
5
Function
IRTX
Ground
IRRX
N. C.
VCC