Filter
Top Products
54
4
Supported Softwares
4.2 Hardware Doctor Utility
The system board comes with a Hardware Doctor utility contained
in the provided CD. This utility is capable of monitoring the systems
health conditions and allows you to manually set a range (Highest
and Lowest Limit) to the items being monitored. If the settings/
values are over or under the set range, a warning message will pop-
up. The utility can also be configured so that a beeping alarm will
sound whenever an error occurs. We recommend that you use the
Default Setting which is the ideal setting that would keep the
system in good working condition.
To install the utility, insert the CD (included in the system board
package) into a CD-ROM drive. The autorun screen will appear.
Double-click the Hardware Doctor icon to install the utility. After
installing the utility, the screen below will appear.
The rightmost column of the screen shows the current value of each
monitored item. To set the highest and lowest limit of each item, click
on the arrow buttons in the Lowest Limit or Highest Limit
column. However, we DO NOT recommend that you change the
(Click here for a clearer view of the screen)