Filter
Top Products
41
3
Award BIOS Setup Utility
7. Press <Esc> to return to the main menu of the Award BIOS
setup utility. Select Save & Exit Setup and press <Enter>.
8. Type <Y> and press <Enter>.
Resume On LAN
With a LAN card installed, the Wake-On-LAN function allows the
network to remotely wake up a Soft Power Down (Soft-Off) PC.
However, if your system is in the Suspend mode, you can wake-
up the system only through an IRQ or DMA interrupt. Make sure
your LAN card supports the remote wakeup function. To use this
function, set this field to Enabled. Refer to the Wake-On-LAN
Connector section in Chapter 2 of this manual for more
information.
Resume On Alarm
Enabled When Enabled, you can s et the date and time you would
like the Soft Power Down (Soft-Off) PC to power-on.
However, if the system is being accessed by incoming calls
or the network (Resume On Ring/LAN) prior to the date
and time set in this field, the system will give priority to
the incoming calls or network. Date (of Month) and
Timer (hh:mm:ss) will appear right below this field.
Disabled Disables the automatic power-on function. (default)
Date (of Month)
0 The system will power-on everyday according to the time
set in the Timer (hh:mm:ss) field.
1-31 Select a date you would like the system to power-on. The
system will power-on on the set date, and time set in the
Timer (hh:mm:ss) field.
Timer (hh:mm:ss)
This is used to set the time you would like the system to power- on.
If you want the system to power-on everyday as set in the Date (of
Month) field, the time set in this field must be later than the time of
the RTC in the Standard CMOS Setup.