Intel MPRTM4808 Computer Hardware User Manual


 
10 Intel
®
NetStructure™ MPRTM4808 Rear Transition Board Installation Guide
Installation
Installation 3
3.1 Introduction
The Intel
®
NetStructure™ MPRTM4808 Rear Transition Board provides easy access to I/O signals
of boards via the CompactPCI backplane.
Backplane I/O signals are available at connector J5. To connect System Management Bus 1 and the
Chassis Management Bus to the board, the Intel MPRTM4808 board provides the Intelligent
Platform Management Bus 1 (IPMB1) and Intelligent Chassis Management Bus (ICMB)
connectors.
Check that the items listed were shipped together with the accessory kit:
Intel
®
NetStructure™ MPRTM4808 Rear Transition Board
Installation Guide
If delivered as part of a system design, the Intel MPRTM4808 board is already installed in the
system. For information on system connectors available for user-defined system configuration,
refer to the respective system’s guide. The cabling of all other connectors of the Intel MPRTM4808
board must remain as configured at system delivery.
Figure 1. Location of IPMB1 and ICMB Connectors