Filter
Top Products
28 Intel
®
NetStructure™ MPRTM4808 Rear Transition Board Installation Guide
Agency Approvals
4.5 Product Safety Information
4.5.1 Safety Precautions
Review the following precautions to avoid injury and prevent damage to this product, or any
products to which it is connected. To avoid potential hazards, use the product only as specified.
Read all safety information provided in the component product user manuals and understand the
precautions associated with safety symbols, written warnings, and cautions before accessing parts
or locations within the unit. Save this document for future reference.
Caution: To Avoid Electric Overload: To avoid electrical hazards (heat shock and/or fire hazard), do not
make connections to terminals outside the range specified for that terminal. See the product user
manual for correct connections.
Caution: To Avoid the Risk of Electric Shock: When supplying power to the system, always make
connections to a grounded main. Always use a power cable with a grounded plug (third grounding
pin). Do not operate in wet, damp, or condensing conditions.
Caution: System Airflow Requirements: Platform components such as processor boards, Ethernet switches,
etc., are designed to operate with external airflow. Components can be destroyed if they are
operated without external airflow. Chassis fans normally provide external airflow when
components are installed in compatible chassis. Filler panels must be installed over unused chassis
slots so that airflow requirements are met. Please refer to the product data sheet for airflow
requirements if you are installing components in custom chassis.
Caution: Microprocessor Heatsinks May Become Hot During Normal Operation: To avoid burns, do not
allow anything to touch processor heatsinks.
Caution: Do Not Operate Without Covers: To avoid electric shock or fire hazard, do not operate this product
with any removed enclosure covers or panels.
Caution: To Avoid the Risk of Electric Shock: Do not operate in wet, damp, or condensing conditions.
Caution: Do Not Operate in an Explosive Atmosphere: To avoid injury, fire hazard, or explosion, do not
operate this product in an explosive atmosphere.
Caution: If Your System Has Multiple Power Supply Sources: Disconnect all external power connections
before servicing.
Warning: Power Supplies Must Be Replaced by Qualified Service Personnel Only.
Caution: Lithium Batteries Are Not Field-Replaceable Units: There is a danger of explosion if a battery is
incorrectly replaced or handled. Do not disassemble or recharge the battery. Do not dispose of the
battery in fire. When the battery is replaced, the same type or an equivalent type recommended by
the manufacturer must be used. Used batteries must be disposed of according to the manufacturer's
instructions. Return the unit to Intel for battery service.