Intel MPRTM4808 Computer Hardware User Manual


 
Intel
®
NetStructure™ MPRTM4808 Rear Transition Board Installation Guide 19
Installation
3.5.2 Removal Procedure
1. Check all installed boards for steps to perform before turning off power.
2. Turn off system power.
3. Unfasten screws of front panel until Intel MPRTM4808 board is detached from rack frame.
4. Unlock handles by pressing on red handle buttons.
5. Press handles outward to disconnect the Intel MPRTM4808 board from backplane.
6. Carefully remove Intel MPRTM4808 board from slot, making sure not to bend any pins.
7. Turn on system power.
3.6 CompactPCI Connectors
The Intel MPRTM4808 board provides CompactPCI connectors J3, J4 and J5. The connector
pinouts in Figure 12 through Figure 15 show how the pins are assigned.
Figure 12. J3 Connector Pinout (Rows A-C)