Intel MPRTM4808 Computer Hardware User Manual


 
Intel
®
NetStructure™ MPRTM4808 Rear Transition Board Installation Guide 23
Installation
3.7.1 ICMB Connector
The ICMB connector can be used to attach the Intel NetStructure MPCBL5525 System Master
Board via the Intel MPRTM4808 board to other systems based on the IPMI. To monitor the overall
system, the chassis can be connected via the Intel MPRTM4808 boards. The IPMI signals are
routed from the CPU via the backplane to the Intel MPRTM4808 board and are then available on
the ICMB connector.
The ICMB bus must be connected via a multi-drop cable or star topology.
The following figure shows how the pins are assigned.
3.7.2 PS/2 Keyboard or Mouse
By using a keyboard/mouse splitter cable, you can use a PS/2 keyboard and a PS/2 mouse at the
same time. The cable is included in the cable assembly kit. This cable may be obtained from Black
Box Corporation (http://www.blackbox.com) or from other qualified vendors.
Figure 17. ICMB Connector Pinout
Figure 18. PS/2 Keyboard/Mouse Connector Pinout