Intel PX865PEL-800 Computer Hardware User Manual


 
PX865PEL-800
9
If you are using DIMM2 and DIMM3 simultaneously, you must use single-sided memory
modules with the total memory used by these two sockets not exceeding 1 GB.
If you will be using double-sided DDR DIMM modules, you can only install up to 2 modules.
When using 2 double-sided DDR DIMM modules, we recommend that you them install into
DIMM1 and DIMM2.
If you are installing only 1 double-sided DDR DIMM module, we recommend that you install
it into either DIMM1 or DIMM2.
The following table contains a complete list of possible memory configurations
DIMM1 DIMM2 DIMM3
Single-sided X X
Single-sided Single-sided X
Single-sided X Single-sided
Single-sided Single-sided Single-sided
X Single-sided X
X Single-sided Single-sided
X X Single-sided
Double-sided X X
X Double-sided X
Double-sided Double-sided X
Single-sided Double-sided X
Double-sided Single-sided Single-sided
Double-sided Single-sided X
Double-sided X Single-sided
RAM Module Installation:
1. Pull the white plastic tabs on each side of the slot away from the slot.
2. Match the notch on the button of the RAM module with the corresponding pattern in the
DIMM slot. This ensures that the module is inserted properly.
3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the
module snaps into place.
4. Repeat steps 1 & 2 for the remaining RAM modules.
The pictures above are for reference only.