Intel PX865PEL-800 Computer Hardware User Manual


 
PX865PEL-800
1
Chapter 1. Getting Started
Introduction
Congratulations on choosing the PX865PEL-800 mainboard! It is based on the 82865P Northbridge
chipset and the ICH5 Southbridge chipset. It supports Intel
®
Pentium
®
4 (Northwood/ Prescott)
Processors with a FSB (Front Side Bus) frequency of 400/533 MHz. It also supports FSB frequency
of 800 MHz by overclock.
The PX865PEL-800 provides 3 DIMM sockets using 184 pin DDR SDRAM with a total capacity of
up to 2GB. You can install unbuffered & non-ECC DDR333/266 (PC2700/ 2100) SDRAM. It also
supports DDR400 by overclock.
The PX865PEL-800 provides one 8X/ 4X AGP Slot that uses 0.8V or 1.5V AGP cards.
The PX865PEL-800 includes built in IDE facilities that support Ultra ATA 33/66/100 BMIDE and
PIO Modes. It also includes built in Serial ATA facility that support SATA 150.
The PX865PEL-800 comes with an AC’97 Sound Codec (ALC650) which supports high quality 6
channels audio (Super 5.1 Channel Audio Effect). It also supports Sony/ Philips Digital Interface
(S/PDIF).
The PX865PEL-800 also comes with six USB 2.0 ports. These also include an infrared header.
Besides the PX865PEL-800 also comes with a LAN chip and provides a back panel LAN port that
supports 10/ 100 Mbps transmission speeds.
The PX865PEL-800 also comes with AGP protection which ensures that you only install 0.8V or
1.5V AGP cards.
All of the information in this manual only for reference. This specification is subject to change
without notice.