Filter
Top Products
PX865PEL-800
33
Use IR Pins
Consult your IR peripheral documentation to select the correct setting of the TxD and RxD signals.
This field only configurable if “UART Mode Select” is set to “ASKIR” or “IrDA”.
Options: Full、Half (default)
Onboard Parallel Port
Select an address and corresponding interrupt for the onboard parallel port.
Options: 378/IRQ7 (default)、278/IRQ5、3BC/IRQ7、Disabled
Parallel Port Mode
This option allows you to select an parallel port mode for the on board parallel port.
Options: ECP(default) Extended Capabilities Port.
EPP Enhanced Parallel Port.
SPP Standard Printer Port.
ECP+EPP ECP & EPP mode.
Normal
EPP Mode Select
Select EPP port type 1.7 or 1.9. This field is only configurable if “Parallel Port Mode” is set to “EPP”
or “ECP+EPP”. Options: EPP 1.9(default)、EPP 1.7
ECP Mode Use DMA
Select a DMA Channel for the parallel port when using the ECP mode. This field is only
configurable if “Parallel Port Mode” is set to “ECP”. Options: 3 (default)、1
Game Port Address
Game Port I/O Address. Options: 201 (default)、209、Disabled
Midi Port Address
Midi Port Base I/O Address. Options: 330、300 (default)、290、Disabled
Midi Port IRQ
This determines the IRQ that the Midi Port will use. Options: 5、10 (default)