Filter
Top Products
PX865PEL-800
29
Integrated Peripherals
Init Display First
With systems that have multiple video cards, this option determines whether the primary display uses
a PCI slot or an AGP slot. Options: Onboard/AGP (default)、PCI Slot
OnChip IDE Device
IDE HDD Block Mode
Block mode is otherwise known as block transfer, multiple commands, or multiple sector read/write.
Select the “Enabled” option if your IDE hard drive supports block mode (most new drives do). The
system will automatically determine the optimal number of blocks to read and write per sector.
Options: Enabled (default)、Disabled
On-Chip Primary/Secondary PCI IDE
The mainboard chipset contains a PCI IDE interface with support for two IDE channels. Select
“Enabled” to activate the first and/or second IDE interface. Select “Disabled” to deactivate the
interface if you are going to install a primary and/or secondary add-in IDE interface. Options:
Enabled (default)、Disabled
IDE Primary/Secondary/Master/Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for each of the IDE
devices that the onboard IDE interface supports. Modes 0 to 4 will increase performance
incrementally. In Auto mode, the system automatically determines the best mode for each device.
Options: Auto (default)、Mode0、Mode1、Mode2、Mode3、Mode4.