Intel S5000PSL Computer Hardware User Manual


 
Intel® Server Boards S5000PSL and S5000XSL Revision History
Revision History
Date Revision
Number
Modifications
November 2005 0.5 Preliminary Draft
March 2006 0.9 Updated all sections with the latest product information, updated illustrations,
added section for Regulatory/Certification, added appendix for Sensor Table,
POST Code Diagnostic LED’s, POST Code & Error Handling, Supported Chassis,
Added references for the S5000XSL.
May 2006 1.0 Updated the Server Board picture and Block Diagram, added information for
which slot the ROMB card goes into, added information on the HDD LED Header,
added information on the Snoop Filter, and cleaned other general things up in the
document.
September 2006 1.1 Updated legal disclaimer; Updated Processor Table; Updated Memory Section
September 2006 1.2 Updated Reference Documents
Disclaimers
Information in this document is provided in connection with Intel
®
products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any
express or implied warranty, relating to sale and / or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make
changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or
"undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or
incompatibilities arising from future changes to them.
The Intel
®
Server Boards S5000PSL and S5000XSL may contain design defects or errors known as errata which may
cause the product to deviate from published specifications. Refer to the Intel® Server Boards S5000PSL and
S5000XSL Specification Update for published errata.
Intel Corporation server baseboards contain a number of high-density VLSI and power delivery components that need
adequate airflow to cool. Intel’s own chassis are designed and tested to meet the intended thermal requirements of
these components when the fully integrated system is used together. It is the responsibility of the system integrator
that chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters
to determine the amount of air flow required for their specific application and environmental conditions. Intel
Corporation can not be held responsible if components fail or the server board does not operate correctly when used
outside any of their published operating or non-operating limits.
Intel, Pentium, Itanium, and Xeon are trademarks or registered trademarks of Intel Corporation.
*Other brands and names may be claimed as the property of others.
Copyright © Intel Corporation 2006.
Revision 1.2
Intel order number: D41763-003
iii