Filter
Top Products
Intel® Server Boards S5000PSL and S5000XSL TPS Design and Environmental Specifications
3.1.3.3.1 Minimum Non-Mirrored Mode Configuration
The server board is capable of supporting a minimum of one DIMM installed. However, for
system performance reasons, Intel’s recommendation is that at least 2 DIMMs be installed.
The following diagram shows the recommended minimum DIMM memory configuration.
Populated DIMM slots are shown in Grey.
TP02300
DIMM D2
DIMM D1
DIMM C2
DIMM C1
DIMM B2
DIMM B1
DIMM A2
DIMM A1
Branch 0
MCH
Channel A
Channel B
Channel D
Channel C
Branch 1
Figure 13. Minimum Two DIMM Memory Configuration
Note: The server board supports single DIMM mode operation. Intel will only validate and
support this configuration with a single 512 MB x8 FBDIMM installed in DIMM socket A1.
Revision 1.2
Intel order number: D41763-003
37