Filter
Top Products
42 Intel
®
Server System SR1550AL/SR1550ALSAS User’s Guide
Figure 36. Installing PCI Riser Assembly into the Server System
3. Press down uniformly until the three hooks on the rear of the PCI riser assembly
engage the server system back panel slots. The riser cards will seat into the
matching sockets on the server board.
4. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
5. Re-install the processor air duct. For instructions, see “Installing the Processor Air
Duct”.
6. Install the server system cover. For instructions, see “Installing the Server System
Cover”.
7. Plug all peripheral devices and the AC power cable into the server.
AF000363
B
A
C