Intel SR1550ALSAS Server User Manual


 
Intel
®
Server System SR1550AL/SR1550ALSAS User’s Guide 59
Installing and Removing the Server Board
Installing the Server Board
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information”.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see “Removing the Chassis
Cover”.
4. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct”.
5. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly”.
6. Remove the fan pack. For instructions, see “Removing the Fan Pack”.
7. Place the server board into the server system as shown in the figure below (see
letter “A”).
8. Attach the server board with six screws (see letter “B”).
Figure 51. Installing the Server Board
A
B
TP02253