Filter
Top Products
Chapter 2 — Configuring and Managing the SF51
SF51 Cordless Scanner User’s Guide 21
The Bluetooth application connects to the boot loader code
on your SF51. “Intermec SF51 Boot Server” may appear in
the Device Name list instead of the name of your SF51
scanner.
5 Use your Bluetooth application to connect to the Intermec
SF51 Boot Server.
6 Start the SF51 Firmware Upgrade Utility.
7 Click Browse to browse to the location of the firmware (.ldr)
file. Select the firmware file and click Open.
8 From the COM Port drop-down list box, select the COM
port that the Intermec SF51 Boot Server is using for
Bluetooth communications.
9 Click Next. The Bluetooth address of your SF51 appears, the
status bar appears, and the upgrade utility upgrades your
SF51 with the latest firmware.
Note: The next time you connect to your PC, your
SF51 device name may be “Intermec SF51 Boot
Server.” When the Bluetooth PIN Code Request box
appears, enter the default PIN, which is 0000. After
you connect, the name and Bluetooth address of your
SF51 should appear in your Bluetooth application.