Filter
Top Products
22
OSD Language
This function allows you to choose the
OSD language between English, Deutsch,
Japanese,SimpliedChineseandTraditional
Chinese. Simply move the red high light bar
to the language that youwish to choose and
press [Enter]. Then, press [Esc] to exit from
this function.
Screen Blanker
If there is no input from the console for the
amount of time set with this function, the
screen is blanked. Key in a value from 1–30
minutes, then press [Enter]. The default set-
ting of 0 disables this function
Hotkey Command Mode
This function allows you to enable or
disable the hotkey commands. Simply
press Y for yes and N for no. Then, press
[Esc] to exit from this function.
Hotkey
This function allows you to set the hotkey
sequence that you wish to use to trigger
hotkeys commands. Simply move the red
high light bar to choose the sequence that
you wish to use and press [Enter]. Then,
press [Esc] to exit from this function.