Filter
Top Products
12
WAN Port
The WAN port is used to connect to an ADSL/Cable modem for linking to the Internet.
WAN MDI/MDIX Switch
The WAN MDI/MDIX switch (MDI= hub or modem side; MDIX= computer or server side) is used to adjust the
cable connection of the WAN port. If the port is connected to a hub, you should move the switch to the “hub” side;
if the port is connected to computer, you should move the switch to the computer side. As for the four LAN ports,
there is no need to add additional switches for each cable connection. This is because the LAN ports support
auto MDI/MDIX.
LAN Ports
The LAN ports are used to connect to a PC, server, hub, switch or other network devices on the intranet.
Reset Button
If you forget your password and/or IP settings, you will not be able to access the BOSS™. You can use the
Reset Button to restore the factory settings. To initiate a reset, you must hold the button for at least 5
seconds.
The primary default settings are listed in the Appendix.
Pictorial Introduction