Filter
Top Products
E-16
NAMES AND FUNCTIONS OF PARTS
Rear panel
1[VIDEO LINE IN] terminal (BNC)
This is the input terminal for composite video
signals.
•To input video via this terminal, set the
INPUT SELECT switch located on the front
panel to “LINE”.
2[VIDEO Y/C IN] terminal (4-PIN)
This is the input terminal for Y/C separate
video signals.
•To input video via this terminal, set the
INPUT SELECT switch located on the front
panel to “Y/C”.
•When wide-screen ID signals are input, the
wide-screen ID signal is recorded.
3[VIDEO LINE OUT] terminal (BNC)
This is the output terminal for composite video
signals.
• It displays the Menu setting screen, Date/
Time setting screen and warning informa-
tion.
• If DISPLAY in the DISPLAY Menu screen is
set to “ON” or “AUTO”, information will be
displayed on-screen, e.g., the operation
mode, date/time and counter. (XPage 20)
•When the input signal or playback signal is
in HDV format, this terminal outputs video
that is converted down to 480i or 576i.
Select the style for displaying down-con-
verted video on a monitor screen with a 4:3
aspect ratio, using DOWN CONV. MODE
on the VIDEO Menu screen. (XPage 74)
4[VIDEO Y/C OUT] terminal (4-PIN)
This is the output terminal for Y/C separate
video signals.
• It displays the Menu setting screen, Date/
Time setting screen and warning informa-
tion.
• If DISPLAY in the DISPLAY Menu screen is
set to “ON” or “AUTO”, information will be
displayed on-screen, e.g., the operation
mode, date/time and counter. (XPage 20)
•When the input signal or playback signal is
in HDV format, this terminal outputs video
that is converted down to 480i or 576i.
Select the style for displaying down-con-
verted video on a monitor screen with a 4:3
aspect ratio, using DOWN CONV. MODE
on the VIDEO Menu screen. (XPage 74)
•When tapes that have recorded wide-
screen signals are played back, the wide-
screen ID signal is output.
When playing back an HDV recorded tape,
wide-screen ID signals are output according
to the mode set using DOWN CONV.
MODE in the VIDEO Menu screen.
Memo
Whether or not to enable SET UP for analog sig-
nals (composite, Y/C separate and component
signals) can be selected with SET UP [60]: DV in
the VIDEO Menu screen (for U model only).
12
4
35890
67
E-17
5[COMPONENT OUT] Component sig-
nal output terminal (BNC×3)
Output terminal for component video signals
(Y/P
B/PR). Outputs analog HD/SD video. Con-
nect this to an HD-compatible monitor with a
COMPONENT IN terminal.
•The video format to output from this termi-
nal can be selected using OUT FORMAT
[60]/[50] in the VIDEO Menu screen.
(XPage 73, 74)
• It displays the Menu setting screen, Date/
Time setting screen and warning informa-
tion.
• If DISPLAY in the DISPLAY Menu screen is
set to “ON” or “AUTO”, information will be
displayed on-screen, e.g., the operation
mode, date/time and counter. (XPage 20)
6[CH1 AUDIO IN] terminal (RCA)
Use this terminal to input analog audio signals.
To enable audio input via this terminal, set the
INPUT SELECT switch located on the front
panel to “LINE” or “Y/C”.
Analog signals are recorded on CH1.
7[CH2 AUDIO IN] terminal (RCA)
Use this terminal to input analog audio signals.
To enable audio input via this terminal, set the
INPUT SELECT switch located on the front
panel to “LINE” or “Y/C”.
Analog signals are recorded on CH2.
8[CH1/3 AUDIO OUT] terminal (RCA)
Use this terminal to output analog audio sig-
nals.
•In the 48kHz audio mode, it outputs the
sound of CH1.
•The output audio channel during playback
of tapes recorded in 32kHz audio mode, or
the EE audio channel during DV signal
input in 32kHz audio mode, can be selected
using A.OUTPUT: DV in the AUDIO Menu
screen. (XPage 72)
9[CH2/4 AUDIO OUT] terminal (RCA)
Use this terminal to output analog audio sig-
nals.
•In the 48kHz audio mode, it outputs the
sound of CH2.
•The output audio channel during playback
of tapes recorded in 32kHz audio mode, or
the EE audio channel during DV signal
input in 32kHz audio mode, can be selected
using A.OUTPUT: DV in the AUDIO Menu
screen. (XPage 72)
0[HDMI OUT] HDMI signal output termi-
nal
Outputs HDMI signals. (HDMI : High Definition
Multimedia Interface)
Outputs digital HD/SD video and digital audio.
This is connected to a monitor with an HDMI
terminal.
•The video format to output from this termi-
nal can be selected using OUT FORMAT
[60]/[50] and MONITOR SELECT in the
VIDEO Menu screen. (XPage 73, 74)
• It displays the Menu setting screen, Date/
Time setting screen and warning informa-
tion.
• If DISPLAY in the DISPLAY Menu screen is
set to “ON” or “AUTO”, information will be
displayed on-screen, e.g., the operation
mode, date/time and counter. (XPage 20)
Memo
z Video is not displayed when the connected
monitor does not support the video format
selected using OUT FORMAT [60]/[50] in the
VIDEO Menu screen.
If this occurs, set MONITOR SELECT to
HDMI[A].
z If the monitor has a DVI-D terminal that sup-
ports HDCP, you can watch digital video by
connecting an HDMIlDVI-D cable.
z When the video format of the IEEE1394 input
signal differs from the IEEE1394 switch, or
INPUT SELECT switch is set to HDV/DV and a
signal is not input into the IEEE1394 terminal,
no signal is output from the HDMI OUT termi-
nal. ("no 1394" is displayed on the counter dis-
play.) Similarly, no signal is output from the
HDMI OUT terminal when a blank cassette
tape is played. ("-------" is displayed on the
counter display.)