Filter
Top Products
List of Error Codes
Printer (Error Code:0x01000000-0x01040000)
No. Error Code Description Actions (Reference Page No.)
1 0x0102D000 Cards have run out. Replenish the cards. (A page 31)
The card hopper is detached. Install the card hopper. (A page 63)
2 0x0102D100 The printer door is open.
Close the door, and press K N B to reset the printer.(A page
22)
The cleaning unit is detached. Install the cleaning unit. (A page 35)
3 0x0102D300 The printer is busy. -
0x0102D400
0x0102D500
4 0x0102DA00 Preheating is in progress. Wait until preheating is complete.
5 0x0102DB00 Printer is initializing. Wait until initialization is complete.
6 0x0102DC00 Offline testing is in progress. Wait until the offline test is complete.
Cleaning is in progress. Wait until cleaning is complete.
7 0x0102DD00 Operation panel is currently in use. -
The printer is in the transport mode. Cancel the transport mode. (A page 29)
8 0x0102DE00 The firmware cannot be downloaded. Set the printer to the download mode. (A page 24)
9 0x0102FD00 The printer is in the Power Saving mode. Resetting the printer temporarily cancels the Power Saving mode. (A
page 22)
The printer resets automatically when the printer driver is used to start
printing.
10 0x0102FE00 Password authentication is not complete. -
11
0x0102RRRR
The printer is not ready. -
12 0x01039000 Failure occurred during card loading. Remove the card according to the procedure for the "Error Code: Jam
(Hopper) 90". (A page 46)
13 0x01039100 Card jam near the card turn over unit. Remove the card according to the procedure for the "Error Code:
Jam(TurnOver) 91". (A page 47)
14 0x01039200 Card jam near the magnetic encoder. Remove the card according to the procedure for the "Error Code: Jam
(MG) 92". (A page 49)
15 0x01039300 Card jam near the card feed roller. Remove the card according to the procedure for the "Error Code: Jam
(Transfer) 93". (A page 50)
16 0x01039400 Card jam near the card outlet. Remove the card according to the procedure for the "Error Code: Jam
(Discharge) 94". (A page 51)
17 0x01039500 Card jam near the retransfer heating roller. Remove the card according to the procedure for the "Error Code: Jam
(Retran.) 95". (A page 52)
18 0x0103A100 Retransfer film is broken. Repair the retransfer film. (A page 56)
Retransfer film is not detected. Install the retransfer film correctly. (A page 61)
19 0x0103A800 A writing error has occurred during magnetic
encoder self-diagnosis.
Check the card specifications.
20 0x0103AD00 An error has occurred during magnetic encoding
data writing.
21 0x0103AE00 An error has occurred during magnetic encoding
data reading.
22 0x0103B000 An incorrect ink ribbon is installed. Install a correct ink ribbon.
23 0x0103B100 Ink ribbon is broken. Repair the ink ribbon. (A page 54)
Ink ribbon is not detected. Install the ink ribbon correctly. (A page 60)
24
0x0103RRRR
A media error has occurred. Check the card specifications.
Setup
120