Filter
Top Products
5
Remove the jammed card in the card turn over unit from the card
load slot
.
"If the card cannot be removed" (A page 48)
6
Install the cleaning unit
7
Attach the jog dial to the card turn over unit shaft, and set the card
turn over unit to “Home Pos.”
v
“Home Pos.” is the position where the slit on the jog dial points to
the right and the card turn over unit is horizontal.
.
.
8
Restore the jog dial to its original position
9
Install the card load slot cover and card hopper, and close the
printer door
10
Turn on the power
Cautions:
v
When a Jam(TurnOver) error occurs, the [Jam(TurnOver)]
message will not disappear after removing the jammed card until
the card turn over unit is set to “Home Pos.”.
v
If the printer door is opened when a Jam(TurnOver) error occurs, a
[Please Adjust Turn Unit Pos!] message will be displayed. Remove
the jammed card, and set the card turn over unit to “Home Pos.”.
m
If the card cannot be removed
A Install the cleaning unit
B Attach the jog dial to the cleaning roller shaft and card turn
over unit shaft
.
.
C Set the card turn over unit to “Home Pos.”
v
“Home Pos.” is the position where the slit on the jog dial
points to the right and the card turn over unit is horizontal.
.
v
If the card protrudes from the card turn over unit, turn the
cleaning roller shaft to move the card into the unit.
Troubleshooting
48