Filter
Top Products
DLA-G150HTE
1-21
No.51847
37
ENGLISHDEUTSHFRANÇAISITALIANOESPAÑOL
Menu Operations
You can adjust picture quality, set functions, get information on the input video signal, etc. using the menus. From the
following menu transition diagrams, you can see the overall menus and basic button operation in menu mode. Note that there
are three menu modes, No signal menu mode, video menu mode and PC menu mode. When the MENU button is pressed,
the projector enters one of these modes by judging the input signal being received.
■ Menu Transition Diagram in No signal Menu Mode
This is displayed if there is no signal from the selected input terminal.
■ Quick Reference Guide for No signal Menu Mode
Main Menu in No signal Menu Mode
Options
Right Left rev.: OFF* / ON (Select for upside-down hanging on the ceiling.)
Top Bottom inv.: OFF* / ON (Select for upside-down hanging on the ceiling.)
RS-232C [bps]: Selectable baud rate (transmission speed). 9600 / 19200*
Sleep time [min:] Selectable sleep times. If no-signal condition continues for the period of selected time
(Unit: Minutes), the projector enters the stand-by mode. 15 / 30 / 60 / OFF*
PC2 (BNC): RGB or YP
B
P
R
*. Set to RGB when a computer device with analog RGB, V, H/Cs signals
is connected to the PC2 terminals. Set to YP
B
P
R
when a device with component signals
(Y, B-Y, R-Y) or DTV-format signals (Y, P
B
, P
R
) are connected to the PC2 terminals.
Language Language for on-screen display.
Japanese / English* / German / Spanish / Italian / French
Information
Input: Shows the terminal name selected by the VIDEO or PC button. (Y/C, VIDEO, or PC2)
Switcher: Has no meaning. This display currently has no meaning. (“CH.0” is usually displayed to
indicate that it is not being used.)
Lamp time: Accumulated used hours of the light-source lamp.
RGB YP
B
P
R
Menu
Options
Language
Information
English
Deutsch
Español
Italiano
Français
Menu
Options
Language
Information
Input
Switcher
Lamp time
PC1
CH.0
123 h
Language
Options
Right Left rev.
Top Bottom inv.
RS-232C [bps]
Sleep time [min]
PC2 (BNC)
OFF
OFF
9600
ON
ON
19200
15 30 60 OFF
English
Deutsch
Español
Italiano
Français
Menu
Options
Language
Information
Right Left rev.
Top Bottom inv.
RS-232C
Sleep time
PC2 (BNC)
Main menu in No signal Menu Mode Submenus in No signal Menu Mode
Press 5/∞ to select an item.
Press 5/∞ to select an item.
Press 2/3 to set the value.
Press 5/∞ to select an item.
3 or ENTER
EXIT
3 or
ENTER
∞
5
∞
5
∞
5
EXIT
38
Menu Operations
■ Menu Transition Diagram in Video Menu Mode
.
Keystone 123
12,12
Ye s
Color temp.
All reset?
No
Menu
Image adj.
Setting
Color temp.
Options
Language
Information
Brightness
Contrast
Sharpness
Color
Tint
All reset
Menu
Image adj.
Setting
Color temp.
Options
Language
Information
Position
Tone
Aspect change
Decoder
Tracking
Film
Phase
Screen
HDTV
Menu
Image adj.
Setting
Color temp.
Options
Language
Information
Menu display
Line display
Keystone
PC2 (BNC)
Right Left rev.
Top Bottom inv.
RS-232C
Sleep time
Image adj.
Brightness
Contrast
Sharpness
Color
Tint
All reset
12
12
1
12
12
ENTER
Color temp.
Color temp.
R-Gain
G-Gain
B-Gain
All reset
R-Gain
G-Gain
B-Gain
All reset
123
123
123
ENTER
Setting 2
Film
Phase
Screen
HDTV
Setting 1
ENTER
12
4:3
1080i
16:9
1035i
Options 1
Menu display
Line display
Keystone
PC2 (BNC)
Options 2
RGB
15sec
5sec
ENTER
ON
OFF
YP
BPR
Middle HighLow
ON AUTOOFF
ENTER
Ye s
Image adj.
All reset?
No
ENTER
Position
Disp.Posi. Menu
Menu
Image adj.
Setting
Color temp.
Options
Language
Information
Decoder
AUTO [ NTSC ]
NTSC
NTSC4.43
PA L
SECAM
Menu
Image adj.
Setting
Color temp.
Options
Language
Information
English
Deutsch
Español
Italiano
Français
Menu
Image adj.
Setting
Color temp.
Options
Language
Information
Input
Switcher
Source
Lamp time
VIDEO
CH.0
NTSC
123 h
Language
Options 2
Right Left rev.
Top Bottom inv.
RS-232C [bps]
Sleep time [min]
Options 1
OFF
OFF
9600
ENTER
ON
ON
19200
15 30 60 OFF
English
Deutsch
Español
Italiano
Français
Setting 1
Position
Tone
Aspect change
Decoder
Setting 2
ENTER
ENTER
ENTER
TV
4:3
Cinema
16:9
Setting 2
Tracking
Phase
Screen
HDTV
Setting 1
123
12
ENTER
4:3
1080i
16:9
1035i
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
3 or
ENTER
You can see the information.
Main menu in Video Menu Mode
Press 5/∞ to select an item.
Press 2/3 to select Yes or No.
Then, press ENTER to execute.
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
Press ENTER to select an item.
Press 5/∞ / 2/3 to move the
video screen/menu position.
EXIT
Press 5/∞ to select an item.
3 or
ENTER
Press 5/∞ to select an item.
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
ENTER
EXIT
ENTER
3
or
ENTER
EXIT
∞
∞
∞
5
5
5
∞
5
∞
5
Submenus in Video Menu Mode
E
N
T
E
R
E
X
I
T
Press 5/∞ to select an item.
E
N
T
E
R
ENTER
ENTER
EXIT
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
EXIT
ENTER
3
or
ENTER
EXIT
3
or
ENTER
EXIT
5
∞
Press 5/∞ to select an item.
Note
• The display languages of the menus are set to “English” when the projector is
bought. The display language can be selected from the following 6 languages:
“ (Japanese)”, “English (English)”, “Deutsch (German)”, “Español (Spanish)”,
“Italiano (Italian)” and “Français (French)”. (Refer to page 45.)
The language settings in the section are explained in “English”.
Press 5/∞ to select an item.
Press 2/3 to set or adjust the value.
EXIT
EXIT
ENTER
E
N
T
E
R
* The film function is
displayed when the
input signal is
equivalent to NTSC
or PAL. The tracking
function is displayed
for other signals.
ENTER