Filter
Top Products
Installing the Projector (continued)
22
This unit comes with a Lens Shift feature that enables upward/downward adjustment of the projection screen position.
Adjust accordingly depending on the installation conditions.
● The shift level is between 0 % and 60 %. The shift level is set to 50 % as the default.
● The position of the projection screen may be out of alignment due to the gear movement.
● When lens shift setting (adjustment) is completed, mount the lens shift cover to this unit.
a Project the image on the screen
● Please refer to ABasic Operation ProceduresB
(A Page 26) on the method of projection.
b Remove the lens shift cover
● Remove the lens shift cover from this unit using a G
screwdriver.
c Adjust the projection screen position
● Turn the shift adjustment screw using a G screwdriver
and adjust accordingly.
Turn clockwise : Screen shifts upwards.
Turn anti-clockwise : Screen shifts downwards.
d Mount the lens shift cover
● Mount the lens shift cover to this unit using a G
screwdriver.
Lens Shift Setting
Lens Shift Cover
Shift DownwardsShift Upwards
Shift Adjustment
Screw
oProjection screen position image according to
shift level
●
The projection screen posi-
tion only shifts vertically.
The slight horizontal dis-
placement shown in the
diagram is illustrative.
Approx. 60% (upward maximum)
Approx. 50% (default position)
Approx. 0%
(downward maximum)
DLA-HD10_EN-FR.book Page 22 Thursday, November 10, 2005 12:54 PM