Filter
Top Products
31
A Image Adjust Menu
To adjust images.
................................................................................................
Gamma
Switches the gradation characteristics of the image.
Select your preference setting values according to the
image to be viewed.
................................................................................................
Color Temp.
Adjusts the color temperature of the projected image.
Red,Green,Blue
● When you set the AColor Temp.B setting to AUser1B or
AUser2B, adjustment of ARed,Green,BlueB can be done.
................................................................................................
Test Pattern
Use this to adjust focus, screen size or picture quality.
There are 10 types of test patterns. Press the [ENTER] or
[TEST] button to alter the test pattern to be projected.
Press the [EXIT] button twice to clear the test pattern.
................................................................................................
Pixel Adjust
Fine-tunes the image position in the horizontal/vertical
directions.
● This is not required under normal circumstances.
H Pixel Adjust
ARedB,AGreenB,ABlueB
V Pixel Adjust
ARedB,AGreenB,ABlueB
B Setup Menu
................................................................................................
Menu Position
Adjusts the display position of the menu screen.
................................................................................................
Mask
Masks (Hides) the outer area of the projected image.
................................................................................................
Flip H
Reverses image to the left or right.
................................................................................................
Flip V
Inverts image upside down.
................................................................................................
Picture Shift
When projecting images with black bands at the top and
bottom (cinema image), use this to move the image up or
down while retaining one of the black bands at the upper
or lower end.
Menu Configuration
Setting Values: ANormalB,AAB,ABB,ACustomB
Default Value: ANormalB
NOTE:
Setting to ACustomB enables you to set (adjust) to a
gamma value of your preference via the computer that is
connected to the projector by using a Gamma adjustment
software. (Default picture quality is equivalent to
ANormalB)
You can download the Gamma adjustment software from
the following website.
http://www.jvc-victor.co.jp/
Setting Values: AD65B,AUser1B,AUser2B
Default Value: AD65B
Setting Values: -255 to 0
Default Value: A0B
Setting Values: 1 to 7
Default Value: A4B
Setting Values: 1 to 7
Default Value: A4B
NOTE:
AH/V Pixel AdjustB allows fine-tuning of images in the
horizontal/vertical directions up to ±3 pixels at intervals of
1 pixel for each of Red, Green and Blue. Make use of a
still image with a clear outline during adjustment. This
feature is intended for fine-tuning of images and therefore
the effect upon adjustment may not be visible to the eye.
Setting Values:
Default Value:
Setting Values: A2.5%B,A5%B,AOffB
Default Value: AOffB
Setting Values: AOnB,AOffB
Default Value: AOffB
Setting Values: AOnB,AOffB
Default Value: AOffB
Setting Values: -30 to 30
Default Value: A0B
ENGLISH
DLA-HD10_EN-FR.book Page 31 Thursday, November 10, 2005 12:54 PM