Kensington MP-20E Projector User Manual


 
E-17
Personal Computer Input Connector
The personal computer input connector uses a 15-pin mini D-SUB type connector.
The pins and their corresponding signal inputs are described below.
Personal Computer Input Connector
54321
10 9876
15 14 13 12 11
NOTE: The RGB (15-pin) input connector of the projector is of the analog type. This cannot be connected with a digital
output type of personal computer.
Connections with the Personal Computer
y GND
u GND
i GND
o NC
!0 GND
!1 NC
!2 SDA (DDC2B)
!3 H.SYNC
!4 V.SYNC
!5 SCL (DDC2B)
q RED VIDEO
w GREEN VIDEO
e BLUE VIDEO
r GND
t NC
Connections with Personal Computers
NOTE:
After connecting the MPC-VGA cable, please set the personal computer external output and screen display.
When the settings of the external output have not been made, "No signal being input" will be displayed.
Connecting Macintosh Computers
Attach the supplied (MPC-VGA) cable if when the monitor output is a VGA port (mini D-SUB 15-pin).
An optional Apple video adapter cable is required when the monitor output is a video port or DVI port.
RGB signal cable MPC-VGA (Supplied item)
Audio cable with mini plugs (Commercially available)
MP-20E