Filter
Top Products
E-23
Regular Operation
This section describes the use of direct operation using the projector and remote control buttons.
Please see the items on Page E-31 "Menu Operation Method" and Page E-34 "Menu Description" for information
about operation using the menu.
Select the Input
Operation with the Projector
Select the input using the INPUT SELECT buttons.
Each press switches the input one step in the sequence
of OHP → PC → VIDEO.
Operation with the Remote Control
Select the input using the INPUT SELECT buttons.
NOTE: The input mode at starting time will be the same as it was the last time the projector was switched off.
When the power of the projector is switched on, the input selection (OHP / PC / VIDEO) icon is displayed.
Adjusting the Volume
Operation with the Projector
Volume adjustment cannot be made at the operation
panel of the projector.
Operation with the Remote Control
Adjust using the VOLUME (+/-) buttons.
Effective only During PC and VIDEO Input
NOTE: Once the volume adjustment bar has been displayed, it will disappear when 10 seconds have passed without a
volume adjustment operation being made.
Volume adjustment bar
OHP
PC
VIDEO