Kensington MP-15E Projector User Manual


 
21
Connecting to a Personal Computer
Images are not projected correctly though they are displayed normally on the
notebook PC.
1 Check the function of the notebook PC.
There is a possibility that images are not projected correctly even through the images are
displayed correctly on the LCD of the notebook PC. When images are displayed on two or
more devices at the same time (e.g. images on the LCD and the signals are output to
other devices at the same time), the input signals are outside the scanning frequency
range of MP-15E because of the restrictions on the notebook PC.
In this case, the correct images cannot be obtained even by the adjustment of MP-15E.
Terminating the display on the LCD, so that only the external output signals are output,
may project images correctly on MP-15E. Refer to the manuals of your notebook PC for
details.
If images of a personal computer are not projected
Check the following if images of a personal computer are not projected, or projected incorrectly.
If images are not projected
If the external output signals from a personal computer are not input to MP-15E, “No PC
signal” appears on the MP-15E display. Check the following if “No PC signal” appears.
1 Restart the computer.
The connection of MP-15E may not be recognized by the personal computer, if MP-15E is
connected after the PC is started up. If the connection is not recognized, images are not
projected because no external output signals from the PC are output.
2 Check the functions of the personal computer.
Some notebook PCs require a special operation to output the signals from the external
output terminal. The external output signals may not be output from the notebook PC
unless the operation is performed.
Refer to the manuals of your notebook PC for the information about how to output signals
from the external output terminal.
Procedure example
• In the case of IBM PC/AT
Press
Fn
key and one of the keys
F1
-
F12
(Procedure may vary from models
to models.)
* This list is compiled based on the troubles that have occurred so far, so it does not include all kinds of
connections.
* The company names, product names are the trade marks or registered trade marks of each company.
List of countermeasures when the connection with the PC is defective
Maker Series
Method to switch
to external output
IBM Think Pad Fn+f7
COMPAQ CONTURA
LATITUDE
ARMADA
DELL
Fn+f4
Fn+f8