Filter
Top Products
29
Basic Operation
■ Basic Operations in the OHP Mode
The functions described here can be operated only when OHP input is selected.
NOTE
• The projected image in the OHP display (projection of actual object) may be slightly distorted as a very wide-
angle lens is used.
1 Place the object you want to project.
Open the document cover, and place the document or printed
matter you want to project on the document pickup section.
Close the document cover.
NOTE
• Objects can be projected even if the document cover is not closed. However, unwanted objects will also be
picked up, making the projected image difficult to view.
2 Adjust the zoom ratio.
You can adjust the zoom between 1x to 2x.
Pressing the button on the left reduces the image, and
pressing the button on the right enlarges the image.
1
2,3
Main Unit Operation
ZOOM
Remote Control Operation
ZOOM
3 Move the zooming position.
Press the arrow buttons on the remote controller to move the
zooming position of the image.
Button: Moves the position up.
Button: Moves the position down.
Button: Moves the position to the left.
Button: Moves the position to the right.
Remote Control Operation
PUSH
SET