Filter
Top Products
23
Connecting to a Personal Computer
● Basic Connections
● Connecting to IBM NOTE and Compatible (DOS/V)
NOTE
After you have connected the MPC-VGA cable, check the external CRT output/internal LCD output states and set
the mode in the software running on the PC.
The connection with the PC will not be made if you do not set the external CRT output mode.
Fix the connector cable using the
screw-in fasteners.
To audio output
terminal on PC
To speaker
input terminals
To RGB input
connector on monitor
To analog RGB
connector on PC
The connector cable model No. differs
according to the type of PC.
RLV OUT IN
PC-AUDIOVIDEO-IN
S-VIDEO
TEST
RGB-OUT PC-IN
Rear of MP-15E main unit
Signal cable MPC-VGA (supplied)
To PC-IN
terminal
MP-15E
● Connecting to an IBM Desktop and Compatible (DOS/V)
NOTE
• When connecting the projector directly to the PC without using the monitor supplied with the PC, you can connect
by the MPC-VGA cable only.
Cable supplied with monitor
Signal Cable
MPC-VGA (supplied)
To RGB-OUT
terminal
To PC-IN
terminal
MP-15E