Filter
Top Products
the
Test Typ
e box
The Test Typ
e box allows to specify how many times the selected test will be repeated when you
press the Test button. Use the
Quick
option to perform the test once. To perform a subsequent test,
press the Test This Port button. Use the Continuous
option to repeat the test continuously. To
stop the test, press the
Stop Test
button (the
Test This Port
button becomes the
Stop Test button
during a test).
the
Test Speed
pull down menu
The Test Speed
pull down menu allows to specify the speed (baud rate) at which the port will be
tested at when you press the
Test This Port
button button.
the
Test Status
box reports
The
Test Status
box reports the test status or results of the selected COM port.
the
Receive FIFO Buffer Size
pull down menu
The Receive FIFO Buffer Size
pull down
menu allows you to configure the number of characters
which are stored in the card's "
First In First O
ut" input buffer ("FIFO") before they are made
available to the computer. The default value of this parameter is "16". The
Receive FIFO
improves
the reliability of data transfer at high speeds. You can turn this option OFF for perform
ance
reasons however this is not necessary in most cases.
the
Update Configuration
button
The
Update Configuration
button updates the Keyspan adapter with the changes you have made
in the Properties tab
. Please note that these changes will take effect when you click the
Update
Configuration
button.
Keyspan:Mini Port Replicator for Windows-v3.2 User Manual
This User Manual applies to the Keyspan Mini Port Replicator Software for
Windows
.
(rev 02jun19JA)
Page 16