Filter
Top Products
A-61588 July 2008 1-9
Attaching the output tray
and special document
feeder
1. Locate the output tray holes on the Scan Station.
2. Insert the pin on the left side of the output tray/special document
feeder in the hole, then press the ribbed button on the right side of
the output tray/special document feeder and insert the pin in the
hole on the right side of the Scan Station.
Powering up the Scan
Station
Turn the power on and wait a few moments while the device completes
it’s self tests.
The Scan Station is now ready to have a configuration file downloaded.
See Chapter 3, Initial Setup and Verification and Chapter 4, Configuring
the Scan Station, for information on setting up the Scan Station and
how create and download configuration files.