Filter
Top Products
A-61588 July 2008 4-13
Updating your Scan
Station settings
When you have saved your administrative configuration on your flash
drive, you can take these settings to a Scan Station and update the
Scan Station.
1. Insert your USB flash drive in the USB port on the Scan Station.
2. If the Scan Station configuration previously had a password
assigned to it, you will be prompted to enter that password before
proceeding with any changes.
If the configuration settings on the USB flash drive are different than
those found on the Scan Station, the following screen will be
displayed.
3. Click Yes. The Select Settings To Replace screen will be displayed.
4. By default, all listed settings will be selected for update; therefore,
unselect the setting(s) you do not want to update. Use the arrows to
scroll through the list to display additional settings.
5. Click Update.