Filter
Top Products
Installing the Hardware
2-4 Part No. 6B4389June 1999Au-
7. Hold the card so that the network cable receptacle is toward
the slot cover. Tilt the card slightly and slide the face plate
connector against the slot.
8. Position the printer interface connectors against the
receptacles on the motherboard to seat the NIC. Press the NIC
gently into place.
9. Install the screws that held the faceplate in place to secure the
NIC.
10. Install the back cover and the 4 screws.
11.Go to the section in this chapter on “Installing the Ethernet
Cable.”
Installing the NIC in an 8670 PS Printer
1. Turn off, and unplug the printer.
2. Attach the wrist portion of the antistatic strap to your wrist.
Attach the other end of the strap to the metal plate on the back
of the printer.
CAUTION: Wear the antistatic strap during this installation
procedure so that you do not generate static
electricity that can damage the printer.