Filter
Top Products
1-2 A-61124 March 1999
About this guide
This Integrator’s Guide provides the information need ed to use the
Kodak Digital Science
Document Scanner 9500.
You should be familiar with the operation of the scanner. If you are
not, refer the Appendix B,
Reference Materials
for a complete
listing of available publications.
In addition to this information, the Integrator’s Guide contains the
following chapters:
• Chapter 2,
Scanning Concepts
, provides an overview of the
scanning process.
• Chapter 3,
Image Headers,
provides an overview of the
information generated during the scanning process.
• Chapter 4,
Scanner-host Communications
, describes the
communications between the scanner and the host system.
• Chapter 5,
The SCSI Interface
, describes the SCSI bus, SCSI
commands, SCSI status and message responses and SCSI
conformance.
• Chapter 6,
Scanner-unique Commands,
describes the
commands used to control the scanner from the host
computer.
• Chapter 7,
The Diagnostic Interface (J45/COIN3),
describes
the communications between the scanner and an RS-232
terminal that can be used as an interface to receive diagnostic
information.
• Appendix A,
Glossary
, provides a list of commonly used terms
and definitions pertaining to the scanning environment.
• Appendix B,
Reference Materials,
provides a list of other
available publications from Kodak supporting the Document
Scanner 9500.
• Appendix C,
Assigning Image Addresses,
defines the fields
required for a valid image address.
• Appendix D,
Image Processing Parameter Defaults
, provides
default parameter values and recommended image processing
parameters.
• Appendix E,
Image Processing,
provides an overview of the
image processing capabilities of the scanner /microimager,
which are controlled by the host computer and methods for
evaluating digitally scanned images.