Filter
Top Products
6-4 A-61124 March 1999
Commands
Each scanner-unique command is described in this section. The
command descriptions appear in alphabetical order.
AX/Y/Z Cropping/ Auto
Cropping
The AX/Y/Z command defines the scan window (cropping
parameters) to be used for the current mode.
Data Field Command Field
xs3...xs0 xl3...x10 ys3...ys0 yl3...yl0 A X/Y/Z
Data Field Description Value(s)
xs3...xs0 Start location for left side of scanning
window — ASCII 4 bytes
0000–1200**
xl3...xl0 Width of the scanning window —
ASCII 4 bytes
0000–1200**
ys3...ys0 Top of the scanning window —
ASCII 4 bytes
0000–2000**
yl3...yl0 Length of the scanning window —
ASCII 4 bytes
0000–3000*,**
* This command accepts 3000 (30 inches). The maximum document
length is 30 inches with a compressed image file size less
2 Mbytes.
** If all data fields are 0000, auto-cropping is selected if the Digital
Science Image Manager is installed and enabled. If the Digital Science
Image Manager is not installed, 0000 should not be used.
NOTES:
• Leading zeros are required. All values entered should be
decimal values, to the nearest 0.01-inch (i.e., if the start location
is to be 2
3
⁄
4
inches from the left margin, enter 0275). The
scanner automatically rounds each value entered to the nearest
0.08-inch (xs, xl and ys fields) or to the nearest 0.08-inch plus
one line for the yl field.
• The sum of xs and xl cannot exceed 1200.
• Document length checking (see the User’s Guide) is not
available for lengths greater than 20 inches.