Filter
Top Products
A-61124 March 1999 5-23
Additional Info Scanner Disabled Error
Sense
Key
Sense
Code
Sense
Qualifier
Description
Bytes
Seq. Id#
Recovery
Required
Fatal
Error
Calibration
Required
Stop
Trans
Control
Panel
0 00 00 No additional information
5 20 00 Invalid command operation code
5 20 80 Invalid scanner-unique command
5 20 82 Invalid scanner-unique command — unknown error
5 20 83 Invalid scanner-unique command — unknown command
5 20 84 Scanner-unique command executed at wrong time
5 20 85 Invalid scanner-unique command — bad data
5 20 86 Invalid scanner-unique command — wrong model
5 20 87 Invalid scanner-unique command — accessory not
available
5 20 88 Internal communications failure during scanner-unique
command processing
5 20 89 Internal processor failure during scanner-unique command
processing
5 24 00 Invalid parameter in Command Data Block (CDB)
5 25 00 Unsupported Logical Unit
6 29 00 Power-on Reset
4 47 00 Parity Error on SCSI
4 4C 00 Logical Unit Failed Self-configuration — front
**
E721
4 4C 00 Logical Unit Failed Self-configuration — rear
**
E722
2 80 00 No data — End-of-Job condition Scanner disabled due to end key
2 80 01 No data — Fault recovery condition Scanner disabled due to previous error
B 80 02 No data - Buffer empty
D 81 00 Buffer Fault — Full
** *
E701
D 81 00 Buffer Fault — Front Compression Error
** *
E715
D 81 00 Buffer Fault — Rear Compression Error
** *
E716
D 81 01 Buffer Fault —- Document Queue Full
** *
E297
4 81 02 Front Image Lost (document record without page detect)
** *
E702
4 81 12 Rear Image Lost (document record without page detect)
** *
E703
4 81 03 Front Queue Error (document count out of sync)
**
E705
4 81 13 Rear Queue Error (document count out of sync)
**
E706
4 82 00 Machine Error —- Fault recovery required
** *
many
4 83 00 Low Contrast Failure — black, front
** *
E292
4 83 10 Low Contrast Failure — black, rear
** *
E292
4 84 01 Calibration Failure — ARC, front * E713
1 84 02 Calibration Failure — dead pixels, front E294
1 84 03 Calibration Failure —- hot pixels, front E294
1 84 04 Calibration Failure — low lamps, front (scan camera) E110
1 84 04 Calibration Failure — low lamps, front (DSA) E208
4 84 05 Calibration Failure — target not seen, front
*
E296
4 84 11 Calibration Failure — ARC, rear
*
E714
1 84 12 Calibration Failure — dead pixels, rear E295
1 84 13 Calibration Failure — hot pixels, rear E295
1 84 14 Calibration Failure —- low lamps, rear (scan camera) E111
1 84 14 Calibration Failure — low lamps, rear (DSA) E209
4 84 15 Calibration failure — target not seen, rear
*
E296
4 85 00 Board failure (AIP, PC, IM Checksum or IM Runtime)
**
E710
4 85 00 Board failure (Front Buffer Parity Error) E718
4 85 00 Board failure (Rear Buffer Parity Error) E719
4 85 00 Board failure (SCSI Init Error)
**
E709