Filter
Top Products
29
Correcting Print Skewing
Where does the skewing occur on the print?
Cleaning the Front Pick Rollers
Important!
Make sure that you wear lint-free
gloves to perform this procedure.
1. Turn off the printer.
2. Unplug the power cord.
3. Pull out the paper trays.
4. Dampen a lint-free cloth with
warm water. Clean the rollers
in both paper trays.
Wipe in
one direction only, rotating
the roller to clean the entire
surface.
5. Remove the paper trays from
the printer.
6. Repeat the cleaning
procedure on the rollers
inside of the bays for the
paper trays.
7. Wait approximately 5 minutes
for the rollers to dry.
8. Plug the power cord for the
printer into the power source.
9. Turn on the printer.
Top of print Bottom of print
See “Cleaning the Front Pick
Rollers” below.
See “Cleaning the Duplex Rollers”
below.