Filter
Top Products
3
If the product casing gets extremely
hot, or if unusual smells or
abnormal noises are emitted from
the product, there is a risk of fire.
Unplug the main power cord and
contact your dealer of Kodak
products.
If the product has been knocked
over or damaged, there is a risk of
electric shock, fire and/or injury.
Unplug the main power cord and
contact your dealer of Kodak
products.
If any liquid enters the product,
there is a risk of fire. Unplug the
main power cord and contact your
dealer of Kodak products.
Do not place containers of liquid on
the product as electric shock, fire
and/or injury may occur.
If any foreign objects enter the
product, there is a risk of electric
shock, fire and/or injury. Unplug the
main power cord before removing
the object.
Do not introduce foreign objects into
the ventilation holes or operate this
product with any covers open or
doors removed as electric shock, fire
and/or injury may occur.
Do not use an extremely flammable
spray near the product as the
product contains high-temperature
parts that may cause a fire.
Turn off the product before cleaning
to prevent any risk of injury. Clean
using a damp cloth. Do not use
liquid or aerosol cleaners.
Ensure loose clothing and hair are
kept clear of moving parts when the
product is in operation to prevent
possible risk of injury.
Do not carry out any operations on
the product that are not specified in
the User's Guide. Doing so may
result in electric shock, fire and/or
injury.
Do not touch the battery if one is
fitted to the product. There is a risk
of explosion if the battery is
replaced by an incorrect type. The
product battery should not require
replacement during the life of the
product.
Do not discard toner cartridges or
image drum cartridges into a fire as
you may receive burns from a dust
explosion.
After installing additional memory,
a hard disk drive, or any other
internally fitted option, any covers
removed or doors opened must be
closed or replaced and secured to
prevent risk of fire.
The acoustic noise of this product is
less than 70 dB (A) as measured in
accordance with EN ISO 7779.
The operating condition range for
this product is: 50 to 90° F
(10 to 32° C) and 20 to 80%
Relative Humidity. Operation of the
product outside this range could
result in damage to the product.