Filter
Top Products
Replacing Consumables52
11
Close the front cover.
12
Carefully close the top cover.
!"
When the top cover is
closed, the black toner
cartridge automatically
moves so that it can be
replaced. With each
press of the Rotate Toner
key, the yellow, then
magenta toner cartridge
moves so that it can be
replaced.
!"
If the Auto Toner Replace
check box has been
selected in Mode Setting
of the Status Display,
closing the top cover
after replacing the toner
cartridge automatically moves the next empty toner cartridge so
that it can be replaced.
If there are no more empty toner cartridges, the printer warms up,
then is automatically reset to be ready to print.
13
Press the Cancel key to reset the printer and clear the indicator message.
!"
If no operation is performed for 30 seconds after the top cover is
closed, the printer automatically resets.
!"
The printer must complete a calibration cycle (less than 2 minutes)
after a toner cartridge has been replaced. If you open a cover
before the printer is reset, the calibration stops, then starts over
again after the cover is closed.