Filter
Top Products
bizhub C360/C280/C220 10-26
10.4 Administrator Settings (G3)
10
Reference
- You can also specify the registered group as the destination.
10.4.11 Fax Settings - PBX Connection Setting
Specify the PBX line connection method.
If the PBX connection mode is enabled, specify an access code for an outside line. An access code refers to
a number used to connect to an outside line, such as a number beginning with a zero ("0").
Outside line numbers specified here are dialed, after which fax numbers registered with the address book or
program are dialed.
Press [No] to clear the entered settings, and then specify an access code (0 to 9999) using the keypad.
Item Description
[Action when TSI User Box is not set.] Configure how the machine should react when a specified
User Box is not found.
[Automatically Print]: Prints received documents.
[Memory RX User Box]: Saves received documents in a Mem-
ory RX User Box.
[Specified User Box] : Saves received documents in a User
Box of this machine. Click [Specified User Box] , and use the
keypad to enter a User Box number.
[Print] Specify whether to print a received document after receiving.
[TSI User Box Registration] Register destinations to which to distribute RX documents.
Up to 128 destinations can be registered. Select a desired
number, and then press [Edit].
[TSI User Box
Settings]
Allows you to distribute received faxes to other fax machines
or User Boxes in this machine. Specify a sender's fax number
in [Sender (TSI)].
Specify a forwarding destination in [Forwarding Destination].
To distribute received faxes to other fax machines, specify
destinations with [Select from Address Book]. To distribute
them to User Boxes in the machine, specify destinations with
[Search by User Box Number].
• A User Box for which confidential reception is enabled, and
a Relay User Box cannot be used for a forwarding destina-
tion.