Filter
Top Products
Advanced Function 5-5
Image Panel
5
5.3.2 Operation flow
This section describes the operation flow from scanning documents until sending them, by operating the
Image Panel in the order of "scanning documents", "editing" and "specifying the destination".
2
Note
It is also possible to specify the destination first, and then scan documents.
Scan the document in the Data Source area.
• To scan an original, position the original and then touch [Scan]. Specify the scan settings as required, and then
start scanning. For details, refer to "Scan" on page 5-6.
• To use a document saved in a user box, select a user box from [User Box List], and select a document to be loaded.
For details, refer to "Load from user box" on page 5-6.
• To use a document saved in an external memory, select the Media tab in the User Box List screen, and then select
a document to be loaded. For details, refer to "Load from external memory" on page 5-7.
Select [Scan] Select [User Box List]
Edit the scanned document in the Edit tool area as necessary.
For details, refer to "Edit" on page 5-8.
Specify the destination of scanned documents in the Data destination area.
• To print a document, touch [Print]. For details, refer to "Print" on page 5-9.
• To send a document, select the destination from [Destination List]. For details, refer to "Specify a recipient" on
page 5-9.
• To save in an external memory, touch [Media] in the Destination List screen. For details, refer to "Save in external
memory" on page 5-10.
Select [Print] Select [Destination List]