Filter
Top Products
Chapter 3 Printer Driver Functions
3-7
●Function List
The following list summarizes functions (Setting Items) which can be set by using the printer driver of the
printing system.
Some of the interfaces to tabs and others are displayed differently by OSs.
Also, among the tabs there are some that are not shown depending on settings.
Refer to "Description of Functions" for details of each function (Setting Items).
(p.3-13)
In addition, refer to "Chapter 4 Control Panel Setup" for how to perform printer settings from the LCD
touch screen.
(p.4-1)
Classification Setting Items Set Value Description 95/98/
Me
NT4.0/
2000
Paper tab Copies 1 to 9999 This function is used to specify
the number of copies to be
printed.
oo
Collate On / Off This function is used to specify
how to output multiple pages.
oo
Orientation Portrait
Landscape
This function is used to specify
orientation.
oo
Paper size 5.5" x 8.5"
8.5" x 11"
8.5" x 14"
11" x 17"
A3 - 297 x 420 mm
A4 - 210 x 297 mm
A5 - 148 x 210 mm
A6 - 105 x 148 mm
B4 - 250 x 354 mm
B5 - 182 x 257 mm
B6 - 128 x 182 mm
F4 - 8.0 x 13 inches
8K - 267 x 390 mm
16K - 195 x 267 mm
5.5" x 8.5" W
8.5" x 11" W
11" x 17" W
A3W- 297 x 420 mm
A4W - 210 x 297 mm
A5W - 148 x 210 mm
B4W - 250 x 354 mm
B5W - 182 x 257 mm
The paper sizes you can set
differ depending on
specifications in the country and
trays. Refer to the operating
manual of the copier for details.
oo
Media Type Plain paper
Thin paper
Thick paper
Tab sheet
2nd Original
OHP [Transparency]
OHP-Interleave
[Blank]
OHP-Interleave [Print]
User defined type
This function is used to specify
the paper type to be printed
from the Bypass tray.
oo
Paper Source Auto Select
Bypass tray
Tray 1
Tray 2
Tray 3
Tray 4(LCT)
This function is used to specify
the paper tray.
oo
HOME