Filter
Top Products
21
4. Press the TAP/RANGE button (lit or-
ange) to return to the MESSAGE param-
eter list.
5. At this point, you can either press the
WRITE button (blinking) to save the
changes you have made, or you can press
the SHIFT button to exit without saving.
Changing the MIDI message
filter settings
1. Hold down the SHIFT button and press
the PROGRAM MEMORY 4 (MIDI FIL-
TER) button.
The display will show the messages to be
filtered.
2. Use the PROGRAM/BPM knob to select
the message you want to filter.
You can specify filter settings for CLOCK,
ProG, CC, and SYS.E transmission and re-
ception.
3. Use the PROGRAM/BPM knob to en-
able or disable transmission/reception.
Choose either diS (disable) or EnA (en-
able). For the Clock setting, choose Int, Ext,
Auto.
NOTE If Clock is set to “Ext” and clock data is re-
ceived via both MIDI and USB, the data from the
USB connection will take priority.
4. To save your settings, press the WRITE
button. If you decide not to save your set-
tings, press the SHIFT button.
5. Press the TAP/RANGE button (lit or-
ange) to return to the MESSAGE param-
eter list.
6. At this point, you can either press the
WRITE button (blinking) to save the
changes you have made, or you can press
the SHIFT button to exit without saving.
To save your edited settings
Press the WRITE button to save the MIDI
settings you edited. If you press the SHIFT
button, you will return to normal opera-
tion without saving.
NOTE If you turn off the power without saving
your settings, they will revert to the previous state.
Messages transmitted and received
With the factory settings (except for EXT CTRL*), the KP3 can transmit and receive the fol-
lowing MIDI messages.
Data transmitted/received
MIDI message transmitted/received
(Factory setting)
Touch pad X-axis Control change (#12)
Touch pad Y-axis Control change (#13)
Touch pad on/off Control change (#92)
LEVEL Slider Control change (#93)
FX DEPTH knob Control change (#94)
HOLD button Control change (#95)
SAMPLE BANK A button note on/off (#36)
SAMPLE BANK B button note on/off (#37)
SAMPLE BANK C button note on/off (#38)
SAMPLE BANK D button note on/off (#39)
PROGRAM/BPM knob Program change (0–127)
Timing clock
* For details on the messages when the KP3 is in EXT CTRL mode, refer to the manual for the KP3 Editor pro-
vided in the CD-ROM.