Filter
Top Products
26
4. In the “What action do you want Win-
dows to take?” choose [Ignore] or [Warn],
and then click [OK].
If necessary, return this setting to its previ-
ous state when you’ve finished installing
the KORG USB-MIDI driver.
Installing the KORG MIDI
driver and editor software
for Mac OS X
Installing the software
Here’s how to start up the individual in-
stallers for the KORG USB-MIDI or KP3
Editor software and install them sepa-
rately.
1. Insert the included CD-ROM into your
computer’s CD-ROM drive.
2. In the CD-ROM, double-click the in-
staller (.pkg) of the desired software to
start up the installer.
The installers are located in the following
folders.
• KORG USB-MIDI driver
“KORG USB-MIDI DRIVER” folder ➝
KORG USB-MIDI DRIVER.pkg
• KP3 Editor
“KP3 Editor” folder ➝ KP3 Editor.pkg
3. Follow the on-screen directions to in-
stall the KORG USB-MIDI driver or the
KP3 Editor software.
NOTE You must install the KORG USB-MIDI
driver into your computer if you want to use KP3
Editor via a USB port.
4. When you’ve installed the software, exit
the installer.
The KP3 and MIDI driver ports
PAD port
MIDI messages from the KP3 (controller
data etc.) are received by your computer
application via this port.
CTRL port
MIDI messages are transmitted from your
computer to the KP3 via this port.
Setting up Sample Librarian/
MIDI Editor
For details on setting-up and using Sample
Librarian/MIDI Editor, refer to the “KP3
Editor owner’s manual.”