Using the Kramer Configuration Manager Software
KRAMER ELECTRONICS, LTD.
4
5 Using the Kramer Configuration Manager Software
This section describes:
• How to install and run the Configuration Manager software, see section 5.1
• The Configuration Manager Window features, see section 5.2
5.1 Installing and Running the Kramer Configuration Manager Software
To install the Kramer Configuration Manager software:
• Insert the CD-ROM in the CD-ROM drive, double click the Setup.exe file
and follow the on-screen instructions
To run the Kramer Configuration Manager software (for the first time):
1. Click the appropriate shortcut in the Start menu’s Programs folder.
The Choose Port window appears as follows:
Figure 2: Choose Port Window
2. Choose the LAN port for configuration via Ethernet, or the appropriate
COM port for configuration via serial cable (see section 6.1) and click OK.
The FC-1ETHN Configuration Manager window (see Figure 3) opens.
To run the Kramer Configuration Manager software (subsequently):
• Click the appropriate shortcut in the Start menu’s Programs folder.
The FC-1ETHN Configuration Manager window (see Figure 3) opens
5.2 Understanding the Kramer Configuration Manager Window
Figure 3 and Table 3 define the FC-1ETHN Configuration Manager window: