Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
ADDENDUM: FC-1ETHN
A2
Figure A1: Virtual Serial Port Manager
Figure A2: Virtual Serial Port Properties
Amendment to Section 7
In section 7.1 (on page 11) steps 5, 6, and 7 are replaced by the following:
5. Connect the ETHERNET port of your FC-1ETHN to a LAN, using a
straight-through cable with RJ-45 connectors.
You can control from up to three computers (each with the Kramer
Windows®-control software).
6. Run the Kramer Windows®-control software to control the Kramer
machine from each computer.
When working with a non-Kramer device, use their existing PC software
or the Microsoft HyperTerminal.
7. In the K-Router Port window, choose the COM port according to the
number of your virtual Serial port:
In section 7.1 (on page 11) Figure 6 is replaced by the following:
Figure A3: Choosing the COM Port