Filter
Top Products
Contents
i
Contents
1 Introduction 1
2 Getting Started 1
3 Overview 1
3.1 Terminology Used in this User Manual 2
3.2 Achieving the Best Performance 3
4 Your FC-1ETHN Ethernet Controller 3
5 Using the Kramer Configuration Manager Software 4
5.1 Installing and Running the Kramer Configuration Manager Software 4
5.2 Understanding the Kramer Configuration Manager Window 4
6 Configuring the FC-1ETHN Ethernet Controller 7
6.1 Configuring the FC-1ETHN via its Serial Port 7
6.2 Configuring the FC-1ETHN via its ETHERNET port 8
6.3 Routing Data in the Slave and Master Routing Modes 9
6.3.1 Slave Routing Mode 9
6.3.2 Master Routing Mode 10
7 Controlling Kramer Machines via Ethernet using the FC-1ETHN 10
7.1 Controlling a Kramer Machine via a Computer 11
7.2 Controlling a Kramer Machine via a Controller 12
8 Flash Memory Upgrade 12
8.1 Downloading from the Internet 12
8.2 Connecting the PC to the RS-232 Port 13
8.3 Upgrading Firmware 13
9 Technical Specifications 16
Figures
Figure 1: FC-1ETHN Ethernet Controller 3
Figure 2: Choose Port Window 4
Figure 3: FC-1ETHN Configuration Manager Window 5
Figure 4: Connecting the FC-1ETHN in the Slave Routing Mode 9
Figure 5: Connecting the FC-1ETHN in the Master Routing Mode 10
Figure 6: Connecting the FC-1ETHN in the Master Routing Mode 11
Figure 7: Splash Screen 13
Figure 8: Atmel – Flip Window 14
Figure 9: Open Configuration File Select Window 14
Figure 10: Atmel – Flip Window (RS-232 Communication) 14
Figure 11: RS-232 Window 15
Figure 12: Atmel – Flip Window (Connected) 15
Figure 13: Atmel – Flip Window (Operation Completed) 16