Filter
Top Products
Technical Specifications
KRAMER ELECTRONICS, LTD.
16
FC1ETHN.hex
Figure 13: Atmel – Flip Window (Operation Completed)
8. Close the “Atmel – Flip” window.
9. Disconnect the power on the FC-1ETHN.
10. Disconnect the RS-232 port on the FC-1ETHN from the Null-modem
adapter.
11. Set DIP 1 REPROG to OFF.
12. Reconnect the power on the FC-1ETHN.
9 Technical Specifications
Table 6 includes the technical specifications:
Table 6: Technical Specifications
1
of the FC-1ETHN Ethernet Controller
ETHERNET INTERFACE: 10/100 BaseT Ethernet
SERIAL INTERFACES: RS-232, DB9M, signals: RX, TX, RTS, CTS, Ground
RS-485
NETWORK PROTOCOLS: ICMP (ping), ARP, TCP, UDP
POWER SOURCE: 12 VDC, <80mA
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98"), W, D, H
WEIGHT: 0.3 kg. (0.66 lbs.) approx.
ACCESSORIES: Power supply, mounting bracket
1 Specifications are subject to change without notice